ich habe Solaranzeige auf einem Raspi installiert, Die Konfig angepasst und meinen Wechselrichter Growatt Mic600 Tl-X mit einem CP2102N_USB_to_UART_Bridge_Controller (RS485-USB Adapter von Amazon) angeschlossen. Der Raspi hat Internetverbindung, die Zeit stimmt, /dev/ttyUSB0 stimmt, Verbindung zu interner und externer InfluxDB wird erkannt, aber es kommen keine Daten.
Habe A und B schon getauscht, Logs gelesen, aber nichts gefunden.
Hier mal das Solaranzeige.log:
Code: Alles auswählen
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.10
S: Manufacturer=Linux 5.10.63-v7+ dwc_otg_hcd
S: Product=DWC OTG Controller
S: SerialNumber=3f980000.usb
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1
P: Vendor=0424 ProdID=2514 Rev=0b.b3
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA
I: If#=0x0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1
P: Vendor=0424 ProdID=2514 Rev=0b.b3
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA
I: If#=0x0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub
T: Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0424 ProdID=7800 Rev=03.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=lan78xx
T: Bus=01 Lev=03 Prnt=03 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=10c4 ProdID=ea60 Rev=01.00
S: Manufacturer=Silicon Labs
S: Product=CP2102N USB to UART Bridge Controller
S: SerialNumber=0001
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=cp210x
13.04. 12:48:58 -Daten:
array (
22 => 'None 00.0: 11300 Partition',
'' => '[Created at block.434]',
'Unique ID' => 'l7UW.SE1wIdpsiiC',
'Parent ID' => 'HAKk.Fxp0d3BezAE',
'SysFS ID' => '/class/block/mmcblk0/mmcblk0p1',
'Hardware Class' => 'partition',
'Model' => '"Partition"',
'Device File' => '/dev/mmcblk0p1',
'Device Files' => '/dev/mmcblk0p1, /dev/disk/by-label/boot, /dev/disk/by-uuid/0C61-73F5, /dev/disk/by-partuuid/8978ce14-01, /dev/disk/by-path/platform-3f202000.mmc-part1, /dev/disk/by-id/mmc-SD32G_0x5be75e48-part1',
'Config Status' => 'cfg=new, avail=yes, need=no, active=unknown',
'Attached to' => '#21 (Disk)',
)
13.04. 12:48:58 -Daten:
array (
23 => 'None 00.0: 11300 Partition',
'' => '[Created at block.434]',
'Unique ID' => 'CJka.SE1wIdpsiiC',
'Parent ID' => 'HAKk.Fxp0d3BezAE',
'SysFS ID' => '/class/block/mmcblk0/mmcblk0p2',
'Hardware Class' => 'partition',
'Model' => '"Partition"',
'Device File' => '/dev/mmcblk0p2',
'Device Files' => '/dev/mmcblk0p2, /dev/disk/by-uuid/43f2d0bb-83be-464f-94d0-9a751f376c64, /dev/disk/by-id/mmc-SD32G_0x5be75e48-part2, /dev/disk/by-label/rootfs, /dev/disk/by-path/platform-3f202000.mmc-part2, /dev/disk/by-partuuid/8978ce14-02',
'Config Status' => 'cfg=new, avail=yes, need=no, active=unknown',
'Attached to' => '#21 (Disk)',
)
13.04. 12:48:58 -Daten:
array (
26 => 'USB 00.0: 0700 Serial controller',
'' => '[Created at usb.122]',
'Unique ID' => 'N0O2.qbyaq5hHEK8',
'Parent ID' => 'lfzD.YCWTDwYJz_B',
'SysFS ID' => '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0',
'SysFS BusID' => '1-1.1.3:1.0',
'Hardware Class' => 'unknown',
'Model' => '"Cygnal Integrated CP2102/CP2109 UART Bridge Controller [CP210x family]"',
'Hotplug' => 'USB',
'Vendor' => 'usb 0x10c4 "Cygnal Integrated Products, Inc."',
'Device' => 'usb 0xea60 "CP2102/CP2109 UART Bridge Controller [CP210x family]"',
'Revision' => '"1.00"',
'Serial ID' => '"0001"',
'Driver' => '"cp210x"',
'Driver Modules' => '"usbserial", "cp210x"',
'Device File' => '/dev/ttyUSB0',
'Device Files' => '/dev/ttyUSB0, /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_0001-if00-port0, /dev/serial/by-path/platform-3f980000.usb-usb-0:1.1.3:1.0-port0',
'Device Number' => 'char 188:0',
'Speed' => '12 Mbps',
'Module Alias' => '"usb:v10C4pEA60d0100dc00dsc00dp00icFFisc00ip00in00"',
'Driver Info #0' => '',
'Driver Status' => 'cp210x is active',
'Driver Activation Cmd' => '"modprobe cp210x"',
'Config Status' => 'cfg=new, avail=yes, need=no, active=unknown',
'Attached to' => '#29 (Hub)',
)
13.04. 12:48:58 -Daten:
array (
27 => 'USB 00.0: 0200 Ethernet controller',
'' => '[Created at usb.122]',
'Unique ID' => 'Vl7j.8_I5RcIC_05',
'Parent ID' => 'lfzD.YCWTDwYJz_B',
'SysFS ID' => '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0',
'SysFS BusID' => '1-1.1.1:1.0',
'Hardware Class' => 'network',
'Model' => '"Standard Microsystems Ethernet controller"',
'Hotplug' => 'USB',
'Vendor' => 'usb 0x0424 "Standard Microsystems Corp."',
'Device' => 'usb 0x7800',
'Revision' => '"3.00"',
'Driver' => '"lan78xx"',
'Driver Modules' => '"lan78xx"',
'Device File' => 'eth0',
'Speed' => '480 Mbps',
'HW Address' => 'b8:27:eb:2c:d8:60',
'Permanent HW Address' => 'b8:27:eb:2c:d8:60',
'Link detected' => 'yes',
'Module Alias' => '"usb:v0424p7800d0300dcFFdsc00dpFFicFFisc00ipFFin00"',
'Config Status' => 'cfg=new, avail=yes, need=no, active=unknown',
'Attached to' => '#29 (Hub)',
)
13.04. 12:48:58 -Daten:
array (
28 => 'USB 00.0: 10a00 Hub',
'' => '[Created at usb.122]',
'Unique ID' => 'k4bc.D6ER+lJeRh3',
'Parent ID' => '3t9U.TAOITtdfnIE',
'SysFS ID' => '/devices/platform/soc/3f980000.usb/usb1/1-0:1.0',
'SysFS BusID' => '1-0:1.0',
'Hardware Class' => 'hub',
'Model' => '"Linux Foundation 2.0 root hub"',
'Hotplug' => 'USB',
'Vendor' => 'usb 0x1d6b "Linux Foundation"',
'Device' => 'usb 0x0002 "2.0 root hub"',
'Revision' => '"5.10"',
'Serial ID' => '"3f980000.usb"',
'Driver' => '"hub"',
'Driver Modules' => '"usbcore"',
'Speed' => '480 Mbps',
'Module Alias' => '"usb:v1D6Bp0002d0510dc09dsc00dp01ic09isc00ip00in00"',
'Config Status' => 'cfg=new, avail=yes, need=no, active=unknown',
'Attached to' => '#1 (USB Controller)',
)
13.04. 12:48:58 -Daten:
array (
29 => 'USB 00.0: 10a00 Hub',
'' => '[Created at usb.122]',
'Unique ID' => 'lfzD.YCWTDwYJz_B',
'Parent ID' => 'ADDn.YCWTDwYJz_B',
'SysFS ID' => '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.0',
'SysFS BusID' => '1-1.1:1.0',
'Hardware Class' => 'hub',
'Model' => '"Standard Microsystems USB 2.0 Hub"',
'Hotplug' => 'USB',
'Vendor' => 'usb 0x0424 "Standard Microsystems Corp."',
'Device' => 'usb 0x2514 "USB 2.0 Hub"',
'Revision' => '"b.b3"',
'Driver' => '"hub"',
'Driver Modules' => '"usbcore"',
'Speed' => '480 Mbps',
'Module Alias' => '"usb:v0424p2514d0BB3dc09dsc00dp02ic09isc00ip02in00"',
'Config Status' => 'cfg=new, avail=yes, need=no, active=unknown',
'Attached to' => '#30 (Hub)',
)
13.04. 12:48:58 -Daten:
array (
30 => 'USB 00.0: 10a00 Hub',
'' => '',
'Unique ID' => 'ADDn.YCWTDwYJz_B',
'Parent ID' => 'k4bc.D6ER+lJeRh3',
'SysFS ID' => '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1:1.0',
'SysFS BusID' => '1-1:1.0',
'Hardware Class' => 'hub',
'Model' => '"Standard Microsystems USB 2.0 Hub"',
'Hotplug' => 'USB',
'Vendor' => 'usb 0x0424 "Standard Microsystems Corp."',
'Device' => 'usb 0x2514 "USB 2.0 Hub"',
'Revision' => '"b.b3"',
'Driver' => '"hub"',
'Driver Modules' => '"usbcore"',
'Speed' => '480 Mbps',
'Module Alias' => '"usb:v0424p2514d0BB3dc09dsc00dp02ic09isc00ip02in00"',
'Config Status' => 'cfg=new, avail=yes, need=no, active=unknown',
'Attached to' => '#28 (Hub)',
)
13.04. 12:48:58 -USB Devices:
array (
1 =>
array (
'Device' => '0xea60',
'File' => '/dev/ttyUSB0',
'Vendor' => 'usb 0x10c4 "Cygnal Integrated Products, Inc."',
'Model' => 'Cygnal Integrated CP2102/CP2109 UART Bridge Controller [CP210x family]',
'Driver Modules' => 'usbserial, cp210x',
'Driver' => 'cp210x',
),
2 =>
array (
'Device' => '0x7800',
'File' => 'eth0',
'Vendor' => 'usb 0x0424 "Standard Microsystems Corp."',
'Model' => 'Standard Microsystems Ethernet controller',
'Driver Modules' => 'lan78xx',
'Driver' => 'lan78xx',
),
3 =>
array (
'Device' => '0x2514',
),
)
13.04. 12:48:58 -Regler: 48
13.04. 12:48:58 -Regler erkannt: /dev/ttyUSB0
13.04. 12:48:59 -Device: /dev/ttyUSB0 wird in die user.config.php eingetragen.
13.04. 12:48:59 -Zeile gefunden. USB Device kann ausgetauscht werden. Index: 652 $USBRegler = "/dev/ttyUSB0";
13.04. 12:48:59 -Zeile gefunden. Raspberry Modell kann eingetragen werden. Index: 671 $Platine = "Raspberry Pi 3 Model B Plus Rev 1.3";
13.04. 12:49:01 MQT-Pipe exestiert nicht. Nur Info, kein Fehler...Exit.
13.04. 12:49:01 |------------------------- Start growatt.php ---------------------
13.04. 12:49:03 -Keine Antwort vom Wechselrichter. Zu dunkel?
13.04. 12:49:03 |------------------------- Stop growatt.php ---------------------
13.04. 12:50:43 MQT-Pipe exestiert nicht. Nur Info, kein Fehler...Exit.
13.04. 12:50:43 |------------------------- Start growatt.php ---------------------
13.04. 12:50:44 -Keine Antwort vom Wechselrichter. Zu dunkel?
13.04. 12:50:44 |------------------------- Stop growatt.php ---------------------
13.04. 12:51:02 MQT-Pipe exestiert nicht. Nur Info, kein Fehler...Exit.
13.04. 12:51:02 |------------------------- Start growatt.php ---------------------
13.04. 12:51:03 -Keine Antwort vom Wechselrichter. Zu dunkel?
13.04. 12:51:03 |------------------------- Stop growatt.php ---------------------
13.04. 12:51:25 |------------------- Start wetterdaten.php --------------------
13.04. 12:51:25 0+ -Ort: Dortmund, 51.5167 N, 7.45 O, ID: 2935517
13.04. 12:51:25 | -Remote: OK. Daten zur InfluxDB gesendet.
13.04. 12:51:25 |* -Lokal: OK. Daten zur InfluxDB gesendet.
13.04. 12:51:25 |------------------- Stop wetterdaten.php ---------------------
13.04. 12:52:01 MQT-Pipe exestiert nicht. Nur Info, kein Fehler...Exit.
13.04. 12:52:01 |------------------------- Start growatt.php ---------------------
13.04. 12:52:03 -Keine Antwort vom Wechselrichter. Zu dunkel?
13.04. 12:52:03 |------------------------- Stop growatt.php ---------------------
13.04. 12:53:01 MQT-Pipe exestiert nicht. Nur Info, kein Fehler...Exit.
13.04. 12:53:01 |------------------------- Start growatt.php ---------------------
13.04. 12:53:03 -Keine Antwort vom Wechselrichter. Zu dunkel?
13.04. 12:53:03 |------------------------- Stop growatt.php ---------------------
13.04. 12:54:01 MQT-Pipe exestiert nicht. Nur Info, kein Fehler...Exit.
13.04. 12:54:01 |------------------------- Start growatt.php ---------------------
13.04. 12:54:03 -Keine Antwort vom Wechselrichter. Zu dunkel?
13.04. 12:54:03 |------------------------- Stop growatt.php ---------------------
13.04. 12:55:01 MQT-Pipe exestiert nicht. Nur Info, kein Fehler...Exit.
13.04. 12:55:01 |------------------------- Start growatt.php ---------------------
13.04. 12:55:03 -Keine Antwort vom Wechselrichter. Zu dunkel?
13.04. 12:55:03 |------------------------- Stop growatt.php ---------------------
13.04. 12:56:01 MQT-Pipe exestiert nicht. Nur Info, kein Fehler...Exit.
13.04. 12:56:01 |------------------------- Start growatt.php ---------------------
13.04. 12:56:02 -Keine Antwort vom Wechselrichter. Zu dunkel?
13.04. 12:56:02 |------------------------- Stop growatt.php ---------------------
Viele Grüße aus Dortmund
Andreas