ich bin neu hier und gerade dabei mir die Solaranzeige einzurichten.
Bitte um HILFE!
Ich habe mit einem Growatt Wechselrichter begonnen, und dieser läuft auch.
Habe dann umgestellt auf Multi-Regler da ich mein SDM630 hinzu fügen wollte.
Soweit hat auch alles geklappt.
Aber ich bekomme keine Daten in Grafana. Im solaranzeige.log steht folgendes:
Die Daten werden über RS485 mit einem FTDI USB Adapter ausgelesen. Beiden wurden mit festen Namen versehen.29.12. 14:53:01 -Multi Regler Auslesen [Start].
29.12. 14:53:01 -Verarbeitung von: '1.user.config.php' Regler: 48
29.12. 14:53:01 |------------------------- Start growatt.php ---------------------
29.12. 14:53:04 -Firmware: GH1.0 Warnungen: 00000000
29.12. 14:53:04 -Auslesen des Gerätes beendet.
29.12. 14:53:04 * -Daten zur lokalen InfluxDB [ solaranzeigemulti ] gesendet.
29.12. 14:53:04 -OK. Datenübertragung erfolgreich.
29.12. 14:53:04 |------------------------- Stop growatt.php ---------------------
29.12. 14:53:04 -Verarbeitung von: '2.user.config.php' Regler: 34
29.12. 14:53:04 + -WR_ID: 002
29.12. 14:53:04 |------------ Start SDM630_meter.php -------------------------
29.12. 14:53:15 -AC Leistung: Watt
29.12. 14:53:18 -InfluxDB => [ AC Spannung=,Strom=,Frequenz=,Leistung=,Leistungsfaktor=,Spannung_R=,Spannung_S=,Spannung_T=,Strom_R=,Strom_S=,Strom_T=,Leistung_R=,Leistung_S=,Leistung_T=,Leistungsfaktor_R=,Leistungsfaktor_S=,Leistungsfaktor_T= 1640785991
Summen Wh_GesamtBezug=0,Wh_GesamtEinspeisung=0,GesamtLeistungsbedarf= 1640785991
]
29.12. 14:53:18 -Daten nicht zur lokalen InfluxDB gesendet! info: array (
'url' => 'http://localhost/write?db=smartmeter&precision=s',
'content_type' => 'application/json',
'http_code' => 400,
'header_size' => 674,
'request_size' => 462,
'filetime' => -1,
'ssl_verify_result' => 0,
'redirect_count' => 0,
'total_time' => 0.002881,
'namelookup_time' => 0.000518,
'connect_time' => 0.00072,
'pretransfer_time' => 0.000818,
'size_upload' => 307.0,
'size_download' => 398.0,
'speed_download' => 199000.0,
'speed_upload' => 153500.0,
'download_content_length' => 398.0,
'upload_content_length' => 307.0,
'starttransfer_time' => 0.002831,
'redirect_time' => 0.0,
'redirect_url' => '',
'primary_ip' => '::1',
'certinfo' =>
array (
),
'primary_port' => 8086,
'local_ip' => '::1',
'local_port' => 58682,
'http_version' => 2,
'protocol' => 1,
'ssl_verifyresult' => 0,
'scheme' => 'HTTP',
'appconnect_time_us' => 0,
'connect_time_us' => 720,
'namelookup_time_us' => 518,
'pretransfer_time_us' => 818,
'redirect_time_us' => 0,
'starttransfer_time_us' => 2831,
'total_time_us' => 2881,
)
29.12. 14:53:23 -InfluxDB => [ AC Spannung=,Strom=,Frequenz=,Leistung=,Leistungsfaktor=,Spannung_R=,Spannung_S=,Spannung_T=,Strom_R=,Strom_S=,Strom_T=,Leistung_R=,Leistung_S=,Leistung_T=,Leistungsfaktor_R=,Leistungsfaktor_S=,Leistungsfaktor_T= 1640785991
Summen Wh_GesamtBezug=0,Wh_GesamtEinspeisung=0,GesamtLeistungsbedarf= 1640785991
]
29.12. 14:53:23 -Daten nicht zur lokalen InfluxDB gesendet! info: array (
'url' => 'http://localhost/write?db=smartmeter&precision=s',
'content_type' => 'application/json',
'http_code' => 400,
'header_size' => 674,
'request_size' => 462,
'filetime' => -1,
'ssl_verify_result' => 0,
'redirect_count' => 0,
'total_time' => 0.001441,
'namelookup_time' => 0.00014,
'connect_time' => 0.000143,
'pretransfer_time' => 0.00037,
'size_upload' => 307.0,
'size_download' => 398.0,
'speed_download' => 398000.0,
'speed_upload' => 307000.0,
'download_content_length' => 398.0,
'upload_content_length' => 307.0,
'starttransfer_time' => 0.001367,
'redirect_time' => 0.0,
'redirect_url' => '',
'primary_ip' => '::1',
'certinfo' =>
array (
),
'primary_port' => 8086,
'local_ip' => '::1',
'local_port' => 58682,
'http_version' => 2,
'protocol' => 1,
'ssl_verifyresult' => 0,
'scheme' => 'HTTP',
'appconnect_time_us' => 144,
'connect_time_us' => 143,
'namelookup_time_us' => 140,
'pretransfer_time_us' => 370,
'redirect_time_us' => 0,
'starttransfer_time_us' => 1367,
'total_time_us' => 1441,
)
29.12. 14:53:28 -Multi-Regler-Ausgang. -15
29.12. 14:53:28 -OK. Datenübertragung erfolgreich.
29.12. 14:53:28 |------------ Stop SDM630_meter.php -----------------------
29.12. 14:53:28 -Multi Regler Auslesen [Stop].
Auch über ttyUSB0 - ttyUSB1 keine Änderung.
Anderer USB-RS485 Adapter versucht.
Kabel A+B getauscht
Anderes Netzteil probiert
Alle Drahtpaare im LAN Kabel vom SDM630 zum Raspi probiert.
Was mir aufgefallen ist, am USB-RS485 Adapter leuchtet nur eine LED beim auslesen des SDM630
Hat jemand eine Lösung? Muss am SDM630 etwas eingestellt werden? Baud ist auf 19200 wie in der Anleitung!
Vielen Dank schon mal.
Gruß
Andi