Hardy Barth echarge cpμ2 pro
Verfasst: Mo 14. Feb 2022, 22:01
Ich wollte neben meinem Fronius Symo noch meine Wallbox mit einbinden (gem. Anleitung Multi-Regler-Version), obgleich ich nicht genau nachvollziehen kann, welche Wallboxen "Regler 60" von Hardy Barth unterstützt werden; bei meiner wird z.B. kein Smartmeter ECB1 mehr benötigt. Die Wallbox holt sich die benötigten Daten direkt via LAN direkt vom Fronius DM.
Solaranzeige (Docker) schmeißt folgende Fehlermeldung.. influxdb "solaranzeige2" habe ich erstellt und auch in Grafana erfolgreich einbinden können.
Solaranzeige (Docker) schmeißt folgende Fehlermeldung.. influxdb "solaranzeige2" habe ich erstellt und auch in Grafana erfolgreich einbinden können.
Code: Alles auswählen
14.02. 21:49:25 |---------------- Start hardy_barth.php ---------------------
14.02. 21:49:25 -Wallbox auf PVMode = manual umschalten
14.02. 21:49:25 -InfluxDB => [ AC Spannung_R=,Spannung_S=,Spannung_T=,Strom_R=,Strom_S=,Strom_T=,Leistung_R=,Leistung_S=,Leistung_T=,Leistung_gesamt=0,Leistungsfaktor_R=,Leistungsfaktor_S=,Leistungsfaktor_T= 1644871751
Service Stationsstatus="",Mode="",MaxAmpere=,Kabel=0,ModeID=,StateID=,AmpereVorgabe=,LadungAmpere= 1644871751
Summen Wh_Gesamt=0,Wh_Ladevorgang=0 1644871751
]
14.02. 21:49:25 -Daten nicht zur lokalen InfluxDB gesendet! info: array (
'url' => 'http://localhost/write?db=solaranzeige2&precision=s',
'content_type' => 'application/json',
'http_code' => 400,
'header_size' => 692,
'request_size' => 506,
'filetime' => -1,
'ssl_verify_result' => 0,
'redirect_count' => 0,
'total_time' => 0.002025,
'namelookup_time' => 0.000316,
'connect_time' => 0.000408,
'pretransfer_time' => 0.000454,
'size_upload' => 348.0,
'size_download' => 420.0,
'speed_download' => 210000.0,
'speed_upload' => 174000.0,
'download_content_length' => 420.0,
'upload_content_length' => 348.0,
'starttransfer_time' => 0.001999,
'redirect_time' => 0.0,
'redirect_url' => '',
'primary_ip' => '127.0.0.1',
'certinfo' =>
(
),
'primary_port' => 8086,
'local_ip' => '127.0.0.1',
'local_port' => 56590,
'http_version' => 2,
'protocol' => 1,
'ssl_verifyresult' => 0,
'scheme' => 'HTTP',
'appconnect_time_us' => 0,
'connect_time_us' => 408,
'namelookup_time_us' => 316,
'pretransfer_time_us' => 454,
'redirect_time_us' => 0,
'starttransfer_time_us' => 1999,
'total_time_us' => 2025,
)
14.02. 21:49:30 -InfluxDB => [ AC Spannung_R=,Spannung_S=,Spannung_T=,Strom_R=,Strom_S=,Strom_T=,Leistung_R=,Leistung_S=,Leistung_T=,Leistung_gesamt=0,Leistungsfaktor_R=,Leistungsfaktor_S=,Leistungsfaktor_T= 1644871751
Service Stationsstatus="",Mode="",MaxAmpere=,Kabel=0,ModeID=,StateID=,AmpereVorgabe=,LadungAmpere= 1644871751
Summen Wh_Gesamt=0,Wh_Ladevorgang=0 1644871751
]
14.02. 21:49:30 -Daten nicht zur lokalen InfluxDB gesendet! info: array (
'url' => 'http://localhost/write?db=solaranzeige2&precision=s',
'content_type' => 'application/json',
'http_code' => 400,
'header_size' => 692,
'request_size' => 506,
'filetime' => -1,
'ssl_verify_result' => 0,
'redirect_count' => 0,
'total_time' => 0.001531,
'namelookup_time' => 6.1E-5,
'connect_time' => 6.1E-5,
'pretransfer_time' => 0.000133,
'size_upload' => 348.0,
'size_download' => 420.0,
'speed_download' => 420000.0,
'speed_upload' => 348000.0,
'download_content_length' => 420.0,
'upload_content_length' => 348.0,
'starttransfer_time' => 0.001504,
'redirect_time' => 0.0,
'redirect_url' => '',
'primary_ip' => '127.0.0.1',
'certinfo' =>
(
),
'primary_port' => 8086,
'local_ip' => '127.0.0.1',
'local_port' => 56590,
'http_version' => 2,
'protocol' => 1,
'ssl_verifyresult' => 0,
'scheme' => 'HTTP',
'appconnect_time_us' => 0,
'connect_time_us' => 61,
'namelookup_time_us' => 61,
'pretransfer_time_us' => 133,
'redirect_time_us' => 0,
'starttransfer_time_us' => 1504,
'total_time_us' => 1531,
)
14.02. 21:49:35 -Multi-Regler-Ausgang. -3
14.02. 21:49:35 -OK. Datenübertragung erfolgreich.
14.02. 21:49:35 |---------------- Stop hardy_arth.php ----------------------