Solaranzeige / PV-Monitor

Support Forum für die Anzeige von BMS, Solarreglern, Wechselrichtern, Pelletöfen, Wärmepumpen usw.
https://solaranzeige.de/phpBB3/

IR Lesekopf Wifi BitShake

https://solaranzeige.de/phpBB3/viewtopic.php?t=3392

Seite 2 von 2

Re: IR Lesekopf Wifi BitShake

Verfasst: Mo 20. Feb 2023, 14:47
von Duck
TeamO hat geschrieben: ↑
Mo 20. Feb 2023, 13:02
 Welchen Fehler im solaranzeige.log meinst Du? Davon hast du bisher nichts geschrieben.
Doch hatte ich im ersten Post als Bild angehangen:

Code: Alles auswählen

20.02. 14:45:11 |----------------   Start  sonoff_mqtt.php    --------------------- 
20.02. 14:45:11    -Zentraler Timestamp: 1676900701
20.02. 14:45:11 +  -Die Daten werden ausgelesen...
20.02. 14:45:11    -Das Sonoff Relais ist nicht aktiv oder es ist kein unterstütztes Sonoff Gerät. Tasmota Modul: 18  Firmware: 12.1.1(tasmota)
20.02. 14:45:11 !! -Keine gültigen Daten empfangen.
20.02. 14:45:11 |----------------   Stop   sonoff_mqtt.php     --------------------
Leider ist der Fehler immernoch da wie man sied :(

Code: Alles auswählen

16:02:09.609 MQT: stat/sonoff/STATUS = {"Status":{"Module":18,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"sonoff","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
16:02:09.614 MQT: stat/sonoff/STATUS1 = {"StatusPRM":{"Baudrate":9600,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"-","RestartReason":"Software/System restart","Uptime":"0T05:07:41","StartupUTC":"2023-02-20T09:54:28","Sleep":50,"CfgHolder":4617,"BootCount":17,"BCResetTime":"2023-02-01T18:36:32","SaveCount":66,"SaveAddress":"FA000"}}
16:02:09.618 MQT: stat/sonoff/STATUS2 = {"StatusFWR":{"Version":"12.1.1(tasmota)","BuildDateTime":"2023-01-06T10:00:57","Boot":31,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"330/699"}}
16:02:09.622 MQT: stat/sonoff/STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Langweilt mich!",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]}}
16:02:09.633 MQT: stat/sonoff/STATUS4 = {"StatusMEM":{"ProgramSize":658,"Free":344,"Heap":16,"ProgramFlashSize":1024,"FlashSize":4096,"FlashChipId":"16405E","FlashFrequency":40,"FlashMode":3,"Features":["00000809","879AC787","043E8001","000000CF","010013C0","C000F989","00004004","00001000","54000020","00000000"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45,62","Sensors":"1,2,3,4,5,6,53"}}
16:02:09.641 MQT: stat/sonoff/STATUS5 = {"StatusNET":{"Hostname":"sonoff-0603","IPAddress":"192.168.178.57","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.178.1","DNSServer2":"0.0.0.0","Mac":"50:02:91:D2:82:5B","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
16:02:09.646 MQT: stat/sonoff/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.47","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_D2825B","MqttUser":"DVES_USER","MqttCount":4,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
16:02:09.651 MQT: stat/sonoff/STATUS7 = {"StatusTIM":{"UTC":"2023-02-20T15:02:09","Local":"2023-02-20T16:02:09","StartDST":"2023-03-26T02:00:00","EndDST":"2023-10-29T03:00:00","Timezone":"+01:00","Sunrise":"07:49","Sunset":"18:17"}}
16:02:09.659 MQT: stat/sonoff/STATUS10 = {"StatusSNS":{"Time":"2023-02-20T16:02:09","EHZ541":{"total_in":3483.3461,"total_out":245.1893,"Power":111,"Volt_L1":0.0,"Volt_L2":0.0,"Volt_L3":0.0,"Ampere_L1":0.0,"Ampere_L2":0.0,"Ampere_L3":0.0,"Phasenwinkel_L1":0.0,"Phasenwinkel_L2":0.0,"Phasenwinkel_L3":0.0,"Frequenz":0}}}
16:02:09.664 MQT: stat/sonoff/STATUS11 = {"StatusSTS":{"Time":"2023-02-20T16:02:09","Uptime":"0T05:07:41","UptimeSec":18461,"Heap":16,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":20,"MqttCount":4,"Wifi":{"AP":1,"SSId":"Langweilt mich!","BSSId":"48:5D:35:83:E4:89","Channel":11,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:03"}}}
16:02:11.021 MQT: stat/sonoff/STATUS = {"Status":{"Module":18,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"sonoff","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
16:02:11.028 MQT: stat/sonoff/STATUS1 = {"StatusPRM":{"Baudrate":9600,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"-","RestartReason":"Software/System restart","Uptime":"0T05:07:43","StartupUTC":"2023-02-20T09:54:28","Sleep":50,"CfgHolder":4617,"BootCount":17,"BCResetTime":"2023-02-01T18:36:32","SaveCount":66,"SaveAddress":"FA000"}}
16:02:11.034 MQT: stat/sonoff/STATUS2 = {"StatusFWR":{"Version":"12.1.1(tasmota)","BuildDateTime":"2023-01-06T10:00:57","Boot":31,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"330/699"}}
16:02:11.040 MQT: stat/sonoff/STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Langweilt mich!",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]}}
16:02:11.053 MQT: stat/sonoff/STATUS4 = {"StatusMEM":{"ProgramSize":658,"Free":344,"Heap":18,"ProgramFlashSize":1024,"FlashSize":4096,"FlashChipId":"16405E","FlashFrequency":40,"FlashMode":3,"Features":["00000809","879AC787","043E8001","000000CF","010013C0","C000F989","00004004","00001000","54000020","00000000"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45,62","Sensors":"1,2,3,4,5,6,53"}}
16:02:11.060 MQT: stat/sonoff/STATUS5 = {"StatusNET":{"Hostname":"sonoff-0603","IPAddress":"192.168.178.57","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.178.1","DNSServer2":"0.0.0.0","Mac":"50:02:91:D2:82:5B","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
16:02:11.066 MQT: stat/sonoff/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.47","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_D2825B","MqttUser":"DVES_USER","MqttCount":4,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
16:02:11.073 MQT: stat/sonoff/STATUS7 = {"StatusTIM":{"UTC":"2023-02-20T15:02:11","Local":"2023-02-20T16:02:11","StartDST":"2023-03-26T02:00:00","EndDST":"2023-10-29T03:00:00","Timezone":"+01:00","Sunrise":"07:49","Sunset":"18:17"}}
16:02:11.084 MQT: stat/sonoff/STATUS10 = {"StatusSNS":{"Time":"2023-02-20T16:02:11","EHZ541":{"total_in":3483.3461,"total_out":245.1893,"Power":83,"Volt_L1":0.0,"Volt_L2":0.0,"Volt_L3":0.0,"Ampere_L1":0.0,"Ampere_L2":0.0,"Ampere_L3":0.0,"Phasenwinkel_L1":0.0,"Phasenwinkel_L2":0.0,"Phasenwinkel_L3":0.0,"Frequenz":0}}}
16:02:11.092 MQT: stat/sonoff/STATUS11 = {"StatusSTS":{"Time":"2023-02-20T16:02:11","Uptime":"0T05:07:43","UptimeSec":18463,"Heap":18,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":20,"MqttCount":4,"Wifi":{"AP":1,"SSId":"Langweilt mich!","BSSId":"48:5D:35:83:E4:89","Channel":11,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:03"}}}

Re: IR Lesekopf Wifi BitShake

Verfasst: Mo 20. Feb 2023, 17:32
von TeamO
Was hast Du in Tasmota als topic eingetragen?
Mach da mal zB "hichi" und in der config ebenfalls.

Re: IR Lesekopf Wifi BitShake

Verfasst: Mo 20. Feb 2023, 18:23
von Duck
Habe ich abgeändert.

Meldung bleibt bestehen troz neustart.

Re: IR Lesekopf Wifi BitShake

Verfasst: Mo 20. Feb 2023, 19:11
von TeamO
Hättest du mal Zeit, das ich mir das über Teamviewer anschaue?

Re: IR Lesekopf Wifi BitShake

Verfasst: Mo 20. Feb 2023, 21:16
von Duck
TeamO hat geschrieben: ↑
Mo 20. Feb 2023, 19:11
 Hättest du mal Zeit, das ich mir das über Teamviewer anschaue?
Sehr gerne :)

Re: IR Lesekopf Wifi BitShake

Verfasst: So 9. Apr 2023, 12:37
von WhySoSyrius
Was war denn hier die Lösung am Ende?

Re: IR Lesekopf Wifi BitShake

Verfasst: So 9. Apr 2023, 14:02
von TeamO
Siehe Deinen anderen Post.
Du musst unter Configuration - Configure Module - Sonoff Basic (1) auswählen.

Re: IR Lesekopf Wifi BitShake

Verfasst: Di 13. Feb 2024, 17:02
von Michael01
Hallo,

erstmal vielen Dank an TeamO für die Anleitungen und den unermüdlichen Einsatz,
Nachdem ich aber mit dem bitShake Wifi Lesekopf fast schon aufgeben habe war das hier die Lösung.
>>>Du musst unter Configuration - Configure Module - Sonoff Basic (1) auswählen.
Allerdings gab es die Option "Sonoff Basic (1)" bei mir nicht, aber mit "ESP32C3 (1)" hat es bei mir geklappt (DE Oberfläche >Einstellugen>Gerät konfigurieren)

Also für andere User mit bitShake diese Hauptanleitung (Konfiguration zum Auslesen von Zählern des MSB - Regler 23):
viewtopic.php?t=3230

Auf Lesekopf dann passendes Skript für Zähler
viewforum.php?f=44

In entsprechender Zeile 3 auf 5 ändern
Beispiel EBZ Leser
Statt +1,3,s,0,9600,DD32R06,1
das hier +1,5,s,0,9600,DD32R06,1

Und dann noch ">Einstellugen>Gerät konfigurieren" auf "ESP32C3 (1)"

Danke
Michael
Alle Zeiten sind UTC+02:00
Seite 2 von 2

Powered by phpBB® Forum Software © phpBB Limited

Deutsche Übersetzung durch phpBB.de