ups,... Sorry Ulli.
da erkenne ich überhaupt nix. Bin absolut ein Anfänger.
Meinst du vielleicht, das bei
$USBDevice =
nur die Nummer 5 hinein gehört, oder /dev/ttyUSB5?
login as: pi
pi@solaranzeige's password:
Linux solaranzeige 6.1.21-v7+ #1642 SMP Mon Apr 3 17:20:52 BST 2023 armv7l
Software Version 5.1.1 [32Bit] basic Juni 2023
Software Version 5.1.1d update September 2023
Software Version 5.1.1e update November 2023
Last login: Thu Nov 2 16:48:12 2023 from 192.168.178.21
pi@solaranzeige:~ $ hwinfo --usb
18: USB 00.0: 0700 Serial controller
[Created at usb.122]
Unique ID: N0O2.zv7lh3BJnp7
Parent ID: lfzD.YCWTDwYJz_B
SysFS ID: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0
SysFS BusID: 1-1.1.3:1.0
Hardware Class: unknown
Model: "QinHeng Electronics HL-340 USB-Serial adapter"
Hotplug: USB
Vendor: usb 0x1a86 "QinHeng Electronics"
Device: usb 0x7523 "HL-340 USB-Serial adapter"
Revision: "2.64"
Driver: "ch341"
Driver Modules: "usbserial"
Device File: /dev/ttyUSB0
Device Files: /dev/ttyUSB0, /dev/serial/by-path/platform-3f980000.usb-usb-0:1.1.3:1.0-port0
Device Number: char 188:0
Speed: 12 Mbps
Module Alias: "usb:v1A86p7523d0264dcFFdsc00dp00icFFisc01ip02in00"
Driver Info #0:
Driver Status: ch341 is active
Driver Activation Cmd: "modprobe ch341"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #24 (Hub)
19: USB 00.0: 10800 Keyboard
[Created at usb.122]
Unique ID: BobO.f7mx8T6d61E
Parent ID: ADDn.YCWTDwYJz_B
SysFS ID: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0
SysFS BusID: 1-1.2:1.0
Hardware Class: keyboard
Model: "Logitech Unifying Receiver"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc534 "Unifying Receiver"
Revision: "29.01"
Driver: "usbhid"
Driver Modules: "usbhid"
Speed: 12 Mbps
Module Alias: "usb:v046DpC534d2901dc00dsc00dp00ic03isc01ip01in00"
Driver Info #0:
XkbRules: xfree86
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (Hub)
20: USB 00.0: 0700 Serial controller
[Created at usb.122]
Unique ID: dwDZ.zv7lh3BJnp7
Parent ID: ADDn.YCWTDwYJz_B
SysFS ID: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0
SysFS BusID: 1-1.3:1.0
Hardware Class: unknown
Model: "QinHeng Electronics HL-340 USB-Serial adapter"
Hotplug: USB
Vendor: usb 0x1a86 "QinHeng Electronics"
Device: usb 0x7523 "HL-340 USB-Serial adapter"
Revision: "2.64"
Driver: "ch341"
Driver Modules: "usbserial"
Device File: /dev/ttyUSB1
Device Files: /dev/ttyUSB1, /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0, /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0
Device Number: char 188:1
Speed: 12 Mbps
Module Alias: "usb:v1A86p7523d0264dcFFdsc00dp00icFFisc01ip02in00"
Driver Info #0:
Driver Status: ch341 is active
Driver Activation Cmd: "modprobe ch341"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (Hub)
21: USB 00.0: 0200 Ethernet controller
[Created at usb.122]
Unique ID: Vl7j.8_I5RcIC_05
Parent ID: lfzD.YCWTDwYJz_B
SysFS ID: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0
SysFS BusID: 1-1.1.1:1.0
Hardware Class: network
Model: "Microchip Technology, Inc. (formerly SMSC) Ethernet controller"
Hotplug: USB
Vendor: usb 0x0424 "Microchip Technology, Inc. (formerly SMSC)"
Device: usb 0x7800
Revision: "3.00"
Driver: "lan78xx"
Driver Modules: "lan78xx"
Device File: eth0
Speed: 480 Mbps
HW Address: b8:27:eb:a9:cc:2b
Permanent HW Address: b8:27:eb:a9:cc:2b
Link detected: yes
Module Alias: "usb:v0424p7800d0300dcFFdsc00dpFFicFFisc00ipFFin00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #24 (Hub)
22: USB 00.1: 10503 USB Mouse
[Created at usb.122]
Unique ID: ezrS.anqLpZFcgY2
Parent ID: ADDn.YCWTDwYJz_B
SysFS ID: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1
SysFS BusID: 1-1.2:1.1
Hardware Class: mouse
Model: "Logitech Unifying Receiver"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc534 "Unifying Receiver"
Revision: "29.01"
Compatible to: int 0x0200 0x0001 "Wortzensur USB Mouse"
Driver: "usbhid"
Driver Modules: "usbhid"
Speed: 12 Mbps
Module Alias: "usb:v046DpC534d2901dc00dsc00dp00ic03isc01ip02in01"
Driver Info #0:
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (Hub)
23: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: k4bc.D6ER+lJeRh3
SysFS ID: /devices/platform/soc/3f980000.usb/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux Foundation 2.0 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0002 "2.0 root hub"
Revision: "6.01"
Serial ID: "3f980000.usb"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0601dc09dsc00dp01ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
24: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: lfzD.YCWTDwYJz_B
Parent ID: ADDn.YCWTDwYJz_B
SysFS ID: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.0
SysFS BusID: 1-1.1:1.0
Hardware Class: hub
Model: "Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub"
Hotplug: USB
Vendor: usb 0x0424 "Microchip Technology, Inc. (formerly SMSC)"
Device: usb 0x2514 "USB 2.0 Hub"
Revision: "b.b3"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v0424p2514d0BB3dc09dsc00dp02ic09isc00ip02in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (Hub)
25: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: ADDn.YCWTDwYJz_B
Parent ID: k4bc.D6ER+lJeRh3
SysFS ID: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1:1.0
SysFS BusID: 1-1:1.0
Hardware Class: hub
Model: "Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub"
Hotplug: USB
Vendor: usb 0x0424 "Microchip Technology, Inc. (formerly SMSC)"
Device: usb 0x2514 "USB 2.0 Hub"
Revision: "b.b3"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v0424p2514d0BB3dc09dsc00dp02ic09isc00ip02in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #23 (Hub)
pi@solaranz